Hi all, some of the old timers around here might remember me, I haven't been on too much in the last couple of years. I do have a guage question. The other day my fuel gauge in my 72 250 c/s just up and quit, and I can't seem to find a vendor that carries them, any ideas? I would like to replace the fuel gauge and the dash voltage regulator (the kind for the printed circut board) at the same time. Anyone have any idea where I can gor both? Either? I would prefer new over used, NOS or repro either is fine.....
Thanks in advance, any help is greatly appreciated.....
Mike
Where can I find gauges?
Moderators: FORDification, Thunderfoot
-
TheeMc
- New Member
- Posts: 81
- Joined: Tue Jun 13, 2006 9:06 am
- Location: South Carolina, Where Dixie Began
Where can I find gauges?
TheeMc
72 F-250 C/S
Why do we drive on a parkway, and park on a driveway?
"98% of all Dodge trucks are still on the road;
The other 2% actually made it home..."
72 F-250 C/S
Why do we drive on a parkway, and park on a driveway?
"98% of all Dodge trucks are still on the road;
The other 2% actually made it home..."
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Where can I find gauges?
Mike,
Good to hear from you man. Think about Alan from time to time-as well as seeing his posts popping up.
I've got the whole panel I offered another member here, but guess he didn't need it. Removed from my 71' when I installed the F-600 panel. Both the gauge and IPVR work fine. How bout' $10.00 plus shipping on your dime?
Would you want the whole panel or just the gauge and IPVR?
Shoot me a PM with your address if you want a shipping quote, shouldn't be too much from here to S.C. though?
Good to hear from you man. Think about Alan from time to time-as well as seeing his posts popping up.
I've got the whole panel I offered another member here, but guess he didn't need it. Removed from my 71' when I installed the F-600 panel. Both the gauge and IPVR work fine. How bout' $10.00 plus shipping on your dime?
Would you want the whole panel or just the gauge and IPVR?
Shoot me a PM with your address if you want a shipping quote, shouldn't be too much from here to S.C. though?
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
GHOST
- New Member
- Posts: 227
- Joined: Thu Aug 05, 2010 5:22 pm
- Location: Mission, Texas
- Contact:
Re: Where can I find gauges?
before replacing the gauge make sure the fuel sending unit is working...I made the mistake of replacing the dash gauge and it turned out to be the sending unit in the fuel tank.... 
If your worried about fuel prices a Big Block Ford is not for you...
-
TheeMc
- New Member
- Posts: 81
- Joined: Tue Jun 13, 2006 9:06 am
- Location: South Carolina, Where Dixie Began
Re: Where can I find gauges?
Thx Ghost...the sending unit was new a couple of years ago, and should be good..
Thanks!
Thanks!
TheeMc
72 F-250 C/S
Why do we drive on a parkway, and park on a driveway?
"98% of all Dodge trucks are still on the road;
The other 2% actually made it home..."
72 F-250 C/S
Why do we drive on a parkway, and park on a driveway?
"98% of all Dodge trucks are still on the road;
The other 2% actually made it home..."
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Where can I find gauges?
Mike,
Sorry I forgot to post this a few days ago. It's hard to remember all the resources Keith has given us here!
Fuel gauge troubleshooting tutorial:
http://www.fordification.com/tech/fuel- ... -units.htm
Sorry I forgot to post this a few days ago. It's hard to remember all the resources Keith has given us here!
Fuel gauge troubleshooting tutorial:
http://www.fordification.com/tech/fuel- ... -units.htm
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4