fubar ignition switch
Moderators: FORDification, Thunderfoot
-
fonfixer
- New Member
- Posts: 114
- Joined: Sat Apr 05, 2008 10:21 pm
- Location: louisiana
fubar ignition switch
Ok, first off for all y'all that don't know "fubar" means broke and can't be fixed. Now can anybody give me a good source for a replacement ignition switch for a '67? Mine expired this morning, I soaked it in WD40 but that did nothing. The key is so worn its almost smooth down the sides so it was going to get replaced sooner or later. No foreign crap allowed!! I would rather redneck engineer something than have MADE IN CHINA/TIAWAN/KOREA
1967 F100 swb 240 single barrel, manuel choke, three on the tree, style side
1967 F100 swb 240 single barrel, manuel choke, three on the tree, flare side
2011 F150 Crewcab Lariet w/Ecoboost (runs like a scalded dog!)
2019 Transit
1967 F100 swb 240 single barrel, manuel choke, three on the tree, flare side
2011 F150 Crewcab Lariet w/Ecoboost (runs like a scalded dog!)
2019 Transit
-
71PA_Highboy
- Blue Oval Fanatic
- Posts: 923
- Joined: Tue May 23, 2006 11:32 am
- Location: Denver of the East
Re: fubar ignition switch
Dennis Carpenter, Napa, a local classic mustang shop (so you can see what you are getting).
Since it sounds like the switch is OK but the cylinder is FUBAR, I would get a cylinder first...
JMHO
Since it sounds like the switch is OK but the cylinder is FUBAR, I would get a cylinder first...
JMHO
Got Ford?
2 EarlyBroncos (68,69)
2 Classic Mustangs (69,70)
1 F250 4x4 (71) - OB - 360, NP435, D24, HPD60 4.10, D60,
1 94 Ranger, 2.3, 5spd
1 Lincoln Mark VIII
2 EarlyBroncos (68,69)
2 Classic Mustangs (69,70)
1 F250 4x4 (71) - OB - 360, NP435, D24, HPD60 4.10, D60,
1 94 Ranger, 2.3, 5spd
1 Lincoln Mark VIII
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: fubar ignition switch
NPD part#11572-1 on page 151 for $47.90. No telling where it's made though. You can call them and ask them "country of origin" and they'll usually walk back and look at the part, (which most suppliers won't do).
http://www.npdlink.com
http://www.npdlink.com
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
fonfixer
- New Member
- Posts: 114
- Joined: Sat Apr 05, 2008 10:21 pm
- Location: louisiana
Re: fubar ignition switch
from what i've read you have to have the switch "on" to remove the cylinder. since i can't turn the cylinder think i could drill it out without much damage?
1967 F100 swb 240 single barrel, manuel choke, three on the tree, style side
1967 F100 swb 240 single barrel, manuel choke, three on the tree, flare side
2011 F150 Crewcab Lariet w/Ecoboost (runs like a scalded dog!)
2019 Transit
1967 F100 swb 240 single barrel, manuel choke, three on the tree, flare side
2011 F150 Crewcab Lariet w/Ecoboost (runs like a scalded dog!)
2019 Transit
-
71PA_Highboy
- Blue Oval Fanatic
- Posts: 923
- Joined: Tue May 23, 2006 11:32 am
- Location: Denver of the East
Re: fubar ignition switch
You turn it to ACC.
AFAIK...
AFAIK...
Got Ford?
2 EarlyBroncos (68,69)
2 Classic Mustangs (69,70)
1 F250 4x4 (71) - OB - 360, NP435, D24, HPD60 4.10, D60,
1 94 Ranger, 2.3, 5spd
1 Lincoln Mark VIII
2 EarlyBroncos (68,69)
2 Classic Mustangs (69,70)
1 F250 4x4 (71) - OB - 360, NP435, D24, HPD60 4.10, D60,
1 94 Ranger, 2.3, 5spd
1 Lincoln Mark VIII
-
tylerb43
- Preferred User
- Posts: 492
- Joined: Fri Nov 14, 2008 2:54 pm
- Location: Union, MO
Re: fubar ignition switch
For those who don't know what fubar means, you need to watch Tango & Cash. 
(sorry, had to) 
Good luck on the ignition fix!
(sorry, had to) Good luck on the ignition fix!
-
70-360fe
- New Member
- Posts: 49
- Joined: Mon Feb 06, 2012 6:44 am
Re: fubar ignition switch
http://www.youtube.com/watch?v=LqgRxxU-0OA
Takes a little while to load. If you can't turn key at least you can see some what inside before drilling.
Takes a little while to load. If you can't turn key at least you can see some what inside before drilling.
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: fubar ignition switch
sorry but couldn't resist...F...
Up
Beyond
All
Repair
Was a common saying heard in the USN!
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4