search being a knuckle head

[timmytim]

Im having trouble with the search feature and was wondering if somebody has a link to some posts about rewiring the mechanical gauges in a 67. Just bought me a 67 and only gauge that works is fuel...

[timmytim]

also the blinker lights on the gauges dont blink but the blinkers on the truck blink. anyone have this same issue?

[timmytim]

the blinker lights on gauges stay lit solid while using the blinkers

[sargentrs]

Here's a thread where somebody had some problems. http://www.fordification.com/forum/view ... &sk=t&sd=a with a good tip by Thunderfoot.

[timmytim]

Here's a thread where somebody had some problems. http://www.fordification.com/forum/view ... &sk=t&sd=a with a good tip by Thunderfoot.

Thanks buddy

[bluef250]

What have you done to trouble shoot the blinker issue? When did is start?

Sound like you are back feeding power from the instrument panel to the turn signal relay.

[timmytim]

What have you done to trouble shoot the blinker issue? When did is start?

Sound like you are back feeding power from the instrument panel to the turn signal relay.

I haven't worked on her yet. I bought it yesterday and just wanted to see if yall could give me some ideas to look at once I start working on it. Its a pretty cool truck. 67 long bed ranger 352 fmx

[timmytim]

[sargentrs]

Very nice!

[Calfdemon]

Nice truck! And that's the first time I have seen a Ranger emblem on a 67 grille. The 67 Ranger did not come with a grille emblem, so someone added that later. The proper placement on the 68-69 models is in the center of the grille so I wonder why the person mounted it up high like that? Anyway, the 67 Ranger had the aluminum grille while the other 67 models had the steel grilles. From the picture it looks like you have the proper grille which is cool. They are harder to come by.

[timmytim]

after I cleaned motor today I found the sensor wires cut on top of the motor

hey yall where is the temp sensor located on the fe's

[timmytim]

[Calfdemon]

after I cleaned motor today I found the sensor wires cut on top of the motor

hey yall where is the temp sensor located on the fe's

It is screwed in to the top of the manifold near the dizzy... If it is stock, then you will see it with a theaded stem sticking out of the top where the push-on end of the wire would go.

[timmytim]

I found the temp senor behind dizzy....I hooked up the oil sensor and temp sensor and got the gauges to work. Working on the volt gauge now. Its powered by the fuse box I think and don't have any fuse blown so not sure why its not working