Sending unit ohm
Moderators: FORDification, Thunderfoot
-
caseyj10
- Preferred User
- Posts: 449
- Joined: Sun Nov 27, 2011 6:24 pm
- Location: Garland, TX
Sending unit ohm
What ohm is our sending units in our In cab tanks? I have a aluminum tank from an Omc boat that I want to put in the bed. It's 240 ohm. I hooked it up to my gauge but it didn't work at all.
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Sending unit ohm
It should read 8-12 ohms full and 70-73 ohms empty.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
caseyj10
- Preferred User
- Posts: 449
- Joined: Sun Nov 27, 2011 6:24 pm
- Location: Garland, TX
Re: Sending unit ohm
darn. guess it wont work.