Hey guys,
How is the internal windshield washer pump removed? Does the tank top come off?
I just bought a used tank w/pump, and I am afraid I might break it removing the pump.
thanks for any help.
71 washer pump removal
Moderators: FORDification, Thunderfoot
- DMiller
- New Member
- Posts: 62
- Joined: Sat Oct 02, 2010 7:32 am
71 washer pump removal
Nothing better than an old truck...
71 F250 Custom
92 Chevy Z71
71 F250 Custom
92 Chevy Z71
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: 71 washer pump removal
there is a star looking spring washer thing that comes out from the outside around the pump. you pick at it and get under it to kind of relase the tension on it and dig it out of the hole. then the pump comes out.
- DMiller
- New Member
- Posts: 62
- Joined: Sat Oct 02, 2010 7:32 am
Re: 71 washer pump removal
Thanks fordman,
There was a lot of corrosion on the friction washer, it broke during removal, but no damage to the tank.
Of course after taking the pump out and testing it......works fine... I now have to find another washer.
There was a lot of corrosion on the friction washer, it broke during removal, but no damage to the tank.
Of course after taking the pump out and testing it......works fine... I now have to find another washer.

Nothing better than an old truck...
71 F250 Custom
92 Chevy Z71
71 F250 Custom
92 Chevy Z71
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: 71 washer pump removal
yea i bet those friction washers would be hard to find without buying a pump. maybe one can be found at a junkyard. those pumps were used in many fords through the years. even in the 80's cars and trucks.
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 71 washer pump removal
The washers can be a real PIA. I usually wind up siliconing the pump back in...
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4