67 wiring

[classic67]

new voltage regulator and wiring into old wiring. none of the wires are matching and there is a what looks like a condenser maybe havent seen this this before ever
open for sugestions
thanks

[Thunderfoot]

The condenser looking thing is a Noise Filter to keep the noise off the radio, however if you have a newer electronic VR then you wont need this.
Not sure what you are saying that the wire colors don't match, as it is a plug in connector to the VR
More info/details as to what you have and are doing will help us to help you better.


BTW welcome to the site!

[fordman]

try looking at different years of wiring. it may help. http://www.fordification.com/tech/schematics_h.htm

[classic67]

im trying to restore my 67 overall its in great shape its just the wiring under the hood it originaly had a 352 fe and it got replaced with a 360 with a 4sp i dont know the differences in wiring for those two years but its weird. the new harness has 2 yellow 2 green 2 white and a black i know who yellow is to the horn but thats it

[fordman]

black is ground from the back of the alt to the regulator core support bolt.
one of the yellows is horn
the white wire #35 goes from the field side of the alt to the very bottom plug on the regulator
the other yellow goes to the starter relay on the fender. and is the second wire down from top.
one of the greens goes to the main cab power from the top position of the regulator. and that wire should be green with a red strip.
i dont see a second green wire. but i do see a white wire with a black stripe that goes to the 3 terminal on the regulator.
i got that from looking at this page. http://www.fordification.com/tech/wirin ... gauges.jpg

now this page is for a truck with dummy lights instead of all gauges in the dash cluster.
but they look the same when i looked at the 68 and 69 diagrams too.

if you can get me a picture of what your workign with i can probably help more than that.

[Thunderfoot]

im trying to restore my 67 overall its in great shape its just the wiring under the hood it originaly had a 352 fe and it got replaced with a 360 with a 4sp i dont know the differences in wiring for those two years but its weird. the new harness has 2 yellow 2 green 2 white and a black i know who yellow is to the horn but thats it

You didn't say what year the other wiring is from...
Also, (motor wise) the wiring for the alternator is the same no mater what motor you use as the alternator is the same... The only difference in the wiring is if you have an "ALT" gauge or the "Idiot" light for the alternator, the wiring is different between these options. I'm guessing the wire harness on the 360 motor is from a truck with different dash options from your truck, there are could also be differences in connector types (not at the VR) as the 67 has a lot of difference from the 68-72 trucks.