Charging, starting, lighting, gauges, HVAC
Moderators: FORDification , Thunderfoot
kaptnkaos
100% FORDified!
Posts: 2029 Joined: Thu Feb 16, 2006 1:27 am
Location: Washington, Elma
Post
by kaptnkaos » Sun Jan 18, 2009 7:41 pm
Hey mljjones67,
Yeah they are plastic lenses with rubber bases... but they are factory, not knock offs.
I think the lenses on all of them are plastic...
KaptnKA
S
mljjones67
Blue Oval Guru
Posts: 1341 Joined: Sun Aug 06, 2006 5:41 pm
Location: Utah, Springville
Contact:
Post
by mljjones67 » Sun Jan 18, 2009 7:50 pm
Are the bases plastic also? Thanks Kpt
kaptnkaos
100% FORDified!
Posts: 2029 Joined: Thu Feb 16, 2006 1:27 am
Location: Washington, Elma
Post
by kaptnkaos » Sun Jan 18, 2009 7:52 pm
Those are rubbery ...
NPD has ones that have metal bases ... they look exactly like the ons on my '68 CS
KaptnKA
S
mljjones67
Blue Oval Guru
Posts: 1341 Joined: Sun Aug 06, 2006 5:41 pm
Location: Utah, Springville
Contact:
Post
by mljjones67 » Sun Jan 18, 2009 7:58 pm
Well I got sniped but thats cool There must have been a couple snipers because it went from $32 to $70 in the last two seconds. Oh well
Thanks again Kapt!!
FLATBEDFORD
100% FORDified!
Posts: 1818 Joined: Sat Feb 18, 2006 1:34 pm
Location: New York, Crugers
Contact:
Post
by FLATBEDFORD » Thu Jan 22, 2009 4:00 pm
You can get lights that look just like the factory ones for about $8 each at just about any auto parts store. The lenses and the bases are plastic with a rubber gasket on the bottom. I have a bunch of used ones that are pretty beat up. I also have the harness that plugs into the light switch and goes up the A pillar.
mljjones67
Blue Oval Guru
Posts: 1341 Joined: Sun Aug 06, 2006 5:41 pm
Location: Utah, Springville
Contact:
Post
by mljjones67 » Thu Jan 22, 2009 4:37 pm
hey Steve I would be interested in the harness if your selling?
FLATBEDFORD
100% FORDified!
Posts: 1818 Joined: Sat Feb 18, 2006 1:34 pm
Location: New York, Crugers
Contact:
Post
by FLATBEDFORD » Thu Jan 22, 2009 4:54 pm
Yes I will sell it. PM offer.