door panel trim

Moderator: FORDification

Post Reply
1968_ONEHUN
New Member
New Member
Posts: 71
Joined: Tue Sep 07, 2004 10:53 pm
Location: Penticton , B.C.
Contact:

door panel trim

Post by 1968_ONEHUN »

hey guys,how do you get the inside door panel trim off?
1968 F-100 Custom Cab
300 6cyl 4spd


If it ain't broke,what the hell, fix it anyways !
michaelbrainard
New Member
New Member
Posts: 91
Joined: Thu Oct 07, 2004 8:06 am
Location: Iowa, Manson
Contact:

re: door panel trim

Post by michaelbrainard »

GENTLY pry it off. It is the chrome/painted ring you are talking about, it is held in place by spring clips. When you pry the ring away from the inner panel you will see the clips that clip into the back of the trim ring and fit into the holes in the inner door panel. The clips will usually stay in the door and the trim ring will flex and release from these clips. Gently pry around the trim ring. Is this what you are wanting?
dotcentral
Preferred User
Preferred User
Posts: 484
Joined: Thu Jul 22, 2004 9:05 pm
Location: Ridgecrest, CA

re: door panel trim

Post by dotcentral »

Use something wide to pry with, like a painter's tool or a wide putty knife, so you don't gouge anything. I sometimes wrap a rag around it first.
Former owner of 70 LB SportCustom and a 71 SB SportCustom. Looking for a replacement bump!
Post Reply