Turn Signal Switch Replacement - tutorial

Suspension, steering, brakes, wheels & tires

Moderator: FORDification

alpine58
New Member
New Member
Posts: 1
Joined: Sat Jan 11, 2014 10:02 am

Re: Turn Signal Switch Replacement - tutorial

Post by alpine58 »

I can't seem to find this article, any help?

Thanks!
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: Turn Signal Switch Replacement - tutorial

Post by sargentrs »

We lost some older threads a while back. This might be of some help. http://www.fordification.com/forum/view ... =5&t=72274
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
Blue1971FordTruck
New Member
New Member
Posts: 32
Joined: Tue Oct 15, 2013 3:32 pm

Re: Turn Signal Switch Replacement - tutorial

Post by Blue1971FordTruck »

i cant see anything
Timmy2times
New Member
New Member
Posts: 4
Joined: Tue Dec 27, 2016 12:25 am

Re: Turn Signal Switch Replacement - tutorial

Post by Timmy2times »

I cant see article either wtf :x :cry: :x :cuss:
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: Turn Signal Switch Replacement - tutorial

Post by sargentrs »

Check the link 2 posts up. That was a really old thread and we lost some of the older stuff due to a server issue a few years ago.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
Redcrew71
New Member
New Member
Posts: 44
Joined: Thu Apr 13, 2017 10:08 am

Re: Turn Signal Switch Replacement - tutorial

Post by Redcrew71 »

This thread helped me out big time. only issue I ran into was pulling the new wire back through. it was a biotch as at the shift column housing it has to shift over through the slotted part. space between the column and shift column housing was pretty tight. I ended up pulling shift housing up and guiding wires through with my fingers.
Post Reply