68 mercury build

Post progress reports on your project truck(s)

Moderator: FORDification

Mercury100
New Member
New Member
Posts: 49
Joined: Thu Oct 05, 2017 10:31 pm

Re: 68 mercury build

Post by Mercury100 »

[image]550[/image]
Mercury100
New Member
New Member
Posts: 49
Joined: Thu Oct 05, 2017 10:31 pm

Re: 68 mercury build

Post by Mercury100 »

[image]556[/image]
Finished front end install.
Had to try the used mustang track pack wheels and tires for “ fit “ lol
Now to lower the back.
Mercury100
New Member
New Member
Posts: 49
Joined: Thu Oct 05, 2017 10:31 pm

Re: 68 mercury build

Post by Mercury100 »

[image]557[/image]
I made some saddles to swap the axle to the top of the springs.
I should have bought them. Lost 2 hours making them up.
Didn’t weld them yet till I have the engine and trans in to set pinion angle.
Looks like I will have to notch the frame.
Only about 4 inches to the bump stop and no load on the springs yet.
The engine parts should be done when I come back from work in two weeks.
Spring should be here too by that time so more chores to do.
Any advice on crown Vic swaps chime in. I’m sure I missed something..lollipops
User avatar
Manny
Blue Oval Guru
Blue Oval Guru
Posts: 1190
Joined: Wed Oct 04, 2006 7:15 pm
Location: Georgia, Lake City
Contact:

Re: 68 mercury build

Post by Manny »

Looks good you figuring a mild c notch to make it or are your going to have to full cut out style notch to make it happen? Keep it up!
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Re: 68 mercury build

Post by mk »

How's the project going? Looking forward to seeing more pics 8)
More info on the mercs here...
http://www.fordification.com/forum/view ... =2&t=35331

mike
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
Post Reply