Hazard lights

tyler67f100 · Post by **tyler67f100** » Thu Dec 07, 2017 8:22 am

on my 67 f100 I can't seem to get the hazards working. The switch was converted to a button awhile ago and it has two wires coming out, neither are connected and I have no idea where they go

Lee · Post by **Lee** » Thu Dec 07, 2017 1:50 pm

Hi,

Fordification has GREAT electrical resources. See:

http://fordification.com/tech/wiring/wi ... ghts02.jpg

The wiring diagram (upper right) shows the hazard switch with 4 wires coming off of it. You state that you have only 2,..... hum....

Hope this helps,
Lee

Busboy · Post by **Busboy** » Thu Dec 07, 2017 6:11 pm

You lost me at "converted". That means f*#@!ed up by some joker. I'd suggest uncovering it and making it back to factory condition.

tyler67f100 · Post by **tyler67f100** » Tue Dec 12, 2017 11:00 am

That is a damn good point, I will most likely have to bring it back to factory. Ill add a picture of what it looks like now and the two unknown wires. One (I am assuming) came though firewall and is also chopped. Ill add it all in the pictures to try to get any sense from it

The FORDification.com Forums

Hazard lights

Hazard lights

Re: Hazard lights

Re: Hazard lights

Re: Hazard lights