Ignition Coil Hot Wire not Hot
Moderators: FORDification, Thunderfoot
-
grandpas68f100
- New Member
- Posts: 6
- Joined: Mon Feb 27, 2017 4:29 pm
Ignition Coil Hot Wire not Hot
Working on my 68 f100 360 and don't have power to ignition coil. What is the easiest way to track where the issue is down? I have the wiring diagrams from FORDification but don't really know where to start? Is this wire fuse controlled? Where is it getting power from to start with? Any help or insight is greatly appreciated.
-
Busboy
- Blue Oval Fanatic
- Posts: 943
- Joined: Sat Jan 24, 2015 9:51 am
- Location: Nampa Idaho
Re: Ignition Coil Hot Wire not Hot
http://fordification.com/tech/wiring/68-09.jpg
Connector D in the picture is where you want to start. This comes from the ignition switch. 16 A should be hot with the key on. As you can see this lead right to the ignition coil + side.
Connector D in the picture is where you want to start. This comes from the ignition switch. 16 A should be hot with the key on. As you can see this lead right to the ignition coil + side.
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.