Before I think about in investing in replacing the firewall pad I'm very curious to know what all has to come out of the dash to get the pad out and back in.
I've insulated and sound deadened the whole cab except this area and now need to do it. Trying to get things a bit quieter in there.
replacing firewall pad?
Moderator: FORDification
-
takehikes
- New Member
- Posts: 134
- Joined: Tue Jun 09, 2015 2:12 pm
- Location: Napa,CA
replacing firewall pad?
1968 F100 SWB Flareside, 240-6, 3 speed, 3.70 rear, bone stock and rust free.
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: replacing firewall pad?
This thread will give you a good idea of what needs to be pulled. You can slit the pad to get around having to pull the wiring harnesses through. http://www.fordification.com/forum/view ... =6&t=75740
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
takehikes
- New Member
- Posts: 134
- Joined: Tue Jun 09, 2015 2:12 pm
- Location: Napa,CA
Re: replacing firewall pad?
I just found a picture of an XLT with a carpeted firewall. I'd like that a lot. Anyone know who might have them?
1968 F100 SWB Flareside, 240-6, 3 speed, 3.70 rear, bone stock and rust free.