My 68 F100 got to me with Unity spotlight mounts already installed. Truck had been either a city or county truck at one time and had spotlights both sides. I'd like to get some and put back in since the mounts are already installed. I'm not much interested in taking the mounts off and trying to repair the holes. However new Unity spotlights are nearing $300 a piece right now!
Any other suggestions or anybody have some laying around?
spotlights
Moderators: FORDification, Thunderfoot
-
takehikes
- New Member
- Posts: 134
- Joined: Tue Jun 09, 2015 2:12 pm
- Location: Napa,CA
spotlights
1968 F100 SWB Flareside, 240-6, 3 speed, 3.70 rear, bone stock and rust free.
-
HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: spotlights
Doesn't Whelen or Setina carry them?
Here you go.. Unity.. $125 each.. https://www.chiefsupply.com/unity-beam- ... ght-6.html
.
Here you go.. Unity.. $125 each.. https://www.chiefsupply.com/unity-beam- ... ght-6.html
.
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
-
takehikes
- New Member
- Posts: 134
- Joined: Tue Jun 09, 2015 2:12 pm
- Location: Napa,CA
Re: spotlights
That price is for only certain models. The spotlights have many lengths and ours is one of the longest and most expensive unfortunately. This site does not offer one that fits our trucks.
1968 F100 SWB Flareside, 240-6, 3 speed, 3.70 rear, bone stock and rust free.
-
Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: spotlights
One of my parts trucks had them on both side. F-350 with a big box on the back so who knows why. Mine were beat up pretty bad and they put the controls through the back of the dash pad. They were a PITA to pull out.
Pity you're so far away, I'd donate them to a good home.
Pity you're so far away, I'd donate them to a good home.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
-
HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: spotlights
takehikes wrote:That price is for only certain models. The spotlights have many lengths and ours is one of the longest and most expensive unfortunately. This site does not offer one that fits our trucks.
You're welcome.
-
Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: spotlights
Funny, I was in the shed a while ago and mine had ford embossed emblems riveted to the outer ring. Maybe tomorrow I'll take some pics of them.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
-
69Ford
- Blue Oval Fanatic
- Posts: 790
- Joined: Tue Sep 11, 2012 9:59 pm
- Location: Minnesota
Re: spotlights
Just for reference this one came off a 69F250 drivers side I plan on using it on my 69.
1969 Ford F100 Styleside standard cab 360 C6
-
Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: spotlights
Yeah, mine are the same way, only beat and dented up pretty bad.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.