bumps with lowered altitude!! (lots of great custom bumps!!)

[guhfluh]

[joelb114]

Here is my lowered bump, it was a '72 longbed that is now a '69 short.
It has a jag xj6 IFS, Explorer 8.8 rear, frame is Z'd front and back and fully boxed
Riding on 20's w/ 30" tall fronts and 32" tall rears, GM ls 6.0l & 4L80e, A/C and Cruise control

20160702_090613 (2).jpg

20160702_090559 (2).jpg

20160702_090726 (3).jpg

[Madjon]

Here is my lowered bump, it was a '72 longbed that is now a '69 short.
It has a jag xj6 IFS, Explorer 8.8 rear, frame is Z'd front and back and fully boxed
Riding on 20's w/ 30" tall fronts and 32" tall rears, GM ls 6.0l & 4L80e, A/C and Cruise control

20160702_090613 (2).jpg

20160702_090559 (2).jpg

20160702_090726 (3).jpg

That is beautiful! Is that a static drop or do you have air?

[joelb114]

20160702_090545.jpg

Thank You, It is static, and has plenty of clearance for daily driving,
I gotta try pretty hard to scrape it on something...

20160702_090707.jpg

20160522_162321.jpg

[Madjon]

20160702_090545.jpg

Thank You, It is static, and has plenty of clearance for daily driving,
I gotta try pretty hard to scrape it on something...

20160702_090707.jpg

20160522_162321.jpg

That is great. Did you have to raise the truck bed floor?

[joelb114]

Yeah, bed floor raised 6 inches...

20160702_090656.jpg

[71blackphantom]

Nice rig

[Craigerf100]

Not sure if my truck qualifies to be here
3"+ front via explorer springs w/ one coil cut.
1" rear
Front and rear addco swaybars

Looks great I think!!





Before with explorer springs w/no coils cut.

[dailyf100]

Tubular mustang II with larger K719 ball joints, dropped spindles, QA1 coil overs with 700lbs springs. Rear notch, axle flip and front hanger flip.
235/55/20 on 20x8 front / 30.5 tall ..........285/50/20 on 20x8 rear / 31.5 tall

[Timmy2times]

that truck is sweet man

[Jody86]

Hey guys!

I have a 69 F100 Long Bed that I want to do the Axle over leaf spring swap. Would I have to C Notch the frame to do this?

[samssvtlightning]

Hey guys!

I have a 69 F100 Long Bed that I want to do the Axle over leaf spring swap. Would I have to C Notch the frame to do this?

if you want it to ride right you will have to. I'm about to start mine today.

[BobbyFord]

Hey guys!

I have a 69 F100 Long Bed that I want to do the Axle over leaf spring swap. Would I have to C Notch the frame to do this?

Yes or you'll have very limited suspension travel.

[xanthias]

Crown suspension has a good c-notch kit I just used. Plasma cutter or cutting wheel and a good drill and you can have done in an uninterrupted afternoon.

http://www.crownsuspension.com/lowering ... notch-kit/

[fcatoem9]

Has anyone done an axle flip with the comfort ride springs?