I need a simplified version of the brake warning circuit
Moderators: FORDification, Thunderfoot
-
Canonman67
- Blue Oval Fan
- Posts: 536
- Joined: Wed Apr 30, 2014 4:49 pm
- Location: California, Galt
I need a simplified version of the brake warning circuit
I've installed an aftermarket wiring harness and gauges so I can't use the diagrams on the site. Do I just run power to the light and then down to the valve grounding the other leg there? If so how do I run the ignition prove out circuit? Thanks in advance, Lionel
-
Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: I need a simplified version of the brake warning circuit
I thought there were two wires to the switch, one to the lamp and the other to 'ign' power. Key switch to 'start' puts power on the lamp leg to test it. The lamp is grounded to the dash.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
-
Nitekruizer
- Blue Oval Fan
- Posts: 545
- Joined: Mon Mar 07, 2011 1:43 pm
- Location: Manitoba, Canada
Re: I need a simplified version of the brake warning circuit
390 FE IN A "BUMP" / 383 WEDGE IN A 2 DOOR C-BODY / 351W IN A FULL-SIZE MERCURY / 194 CHEVY 6 IN A DUECE / 2.4 DOHC CHRYSLER IN A PLASTIC BUBBLE (Driver)
-
Canonman67
- Blue Oval Fan
- Posts: 536
- Joined: Wed Apr 30, 2014 4:49 pm
- Location: California, Galt
Re: I need a simplified version of the brake warning circuit
And that's why I ask. I had it TOTALLY wrong. Thank you gentlemen. 