Need a printed circuit for 71 72 gauge set

[Aurelio Landeros]

so the copper ends on my board have broken off and really dont want to pay 100 dollars. Anyone got one let me know pls. thanks guys

[Ranchero50]

Junk yard. A #2 phillips screwdriver, a 3/8" nut driver and a tiny adjustable wrench should have one out in about 15 minutes if not less. I've had good luck finding them already out sitting in the bed or on the floor over the years.

I made the mistake of putting some dialectic grease on the terminal and it melted the glue on mine. Thus no oil working pressure gauge and I need to swap mine out too.

[Russell J]

With full gauges or with warning lights? Sorry, not sure what you mean by 'gauge set'.

[Aurelio Landeros]

With full gauges or with warning lights? Sorry, not sure what you mean by 'gauge set'.

they have gauges no warning lights

[Aurelio Landeros]

Junk yard. A #2 phillips screwdriver, a 3/8" nut driver and a tiny adjustable wrench should have one out in about 15 minutes if not less. I've had good luck finding them already out sitting in the bed or on the floor over the years.

I made the mistake of putting some dialectic grease on the terminal and it melted the glue on mine. Thus no oil working pressure gauge and I need to swap mine out too.

ive been calling some of the local junk yards and they said they dont keep cars that old

[Russell J]

I have one. PM me and we'll work something out.