hazard switch

[Cheryl]

Hello, I need some help determining where to put the hazard switch in my restored 1967 Ford F100.
I took it down to bare frame and am putting it back together now, all is going well but can't figure where to put the switch. Seem it went in the glove box???? I installed a new glove box and will need to cut a hole in it for the switch IF this where it belongs.
I sure would appreciate any help with this. Thanks, Cheryl

[daveford72]

Hello, I need some help determining where to put the hazard switch in my restored 1967 Ford F100.
I took it down to bare frame and am putting it back together now, all is going well but can't figure where to put the switch. Seem it went in the glove box???? I installed a new glove box and will need to cut a hole in it for the switch IF this where it belongs.
I sure would appreciate any help with this. Thanks, Cheryl

Cheryl, all the 67s i have owned had that switch in the glove box. I cut a hole in the top of my new box to put it in. You could just mount it under the dash below the glove box door. Or just add to the harness then you can put it any where you want it.Hope this helps, Good luck with your build! David

[sargentrs]

A good follow up from a former post http://www.fordification.com/forum/view ... hp?t=26228