Ignition switch for 1969 F250
Moderators: FORDification, Thunderfoot
-
- New Member
- Posts: 2
- Joined: Sun May 03, 2015 5:18 pm
Ignition switch for 1969 F250
I know this has probable been hashed thru before but I am a new to this site and I can't find the info, my F250 69 truck ignition switch has started to act up and the gauges will flicker if I play with the key, I have read about fires starting and a new switch, plug combo to solve the problem. I can find switches but not the plug with pigtails or a wiring schematic, I have stopped driving the truck till I can solve it. Any help would be appreciated.
-
- Blue Oval Fan
- Posts: 617
- Joined: Mon May 10, 2010 6:09 pm
- Location: Tacoma, WA
Re: Ignition switch for 1969 F250
Get an ignition switch for a 1970 and up Ford truck. They switched to 1/4" spade terminals, and the pigtail is also available. There are diagrams in the technical section. Note that the ACC pin and Coil pin are reversed on the '69 wiring diagram.
Common Sense is an Uncommon Virtue
-
- New Member
- Posts: 2
- Joined: Sun May 03, 2015 5:18 pm
Re: Ignition switch for 1969 F250
thanks for the help, any idea what the part # is to the pigtail ?
-
- Blue Oval Fan
- Posts: 617
- Joined: Mon May 10, 2010 6:09 pm
- Location: Tacoma, WA
Re: Ignition switch for 1969 F250
Pigtail
Napa: ECH EC155
http://www.napaonline.com/Catalog/Catal ... 0334580250
Switch
Napa: ECH KS6598
http://www.napaonline.com/Catalog/Catal ... 0180980115
Napa: ECH EC155
http://www.napaonline.com/Catalog/Catal ... 0334580250
Switch
Napa: ECH KS6598
http://www.napaonline.com/Catalog/Catal ... 0180980115
Common Sense is an Uncommon Virtue