Darn blinkers stopped working. No light on them. All my other lights work. Fuse is good. On the run will have to trouble shoot later. They been working great past 4 years I will check the flasher, but I thought when a flasher goes bad the signal light still comes on but doesn't blink.
Any input is ok with this old Fart
Keep on Trucking...John
May your sails stay full, and your knots not slip. Unless a slip knot.
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
I have had the flasher go bad and keep the light on, and I have had them go bad and keep the light off. It just depends if the flasher stops working with the connection open or closed. More than likely, it is your flasher. If your hazards work, just take your flasher from your hazard circuit and put it in the blinker circuit and see if it starts working. If so, then just go get another flasher.
May your sails stay full, and your knots not slip. Unless a slip knot.
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8