Wireing
Moderators: FORDification, Thunderfoot
-
- New Member
- Posts: 56
- Joined: Sun Sep 09, 2012 5:30 pm
- Location: South Texas
Wireing
I just bought a 67 f100 But the under dash wireing harness ( the main harness ) is all torn up I took it off to see if I could replace it but its hard to find an otherone, any knows where I can find one ( preferably an OEM part ) or what would be my best bet, Thank you
- colnago
- 100% FORDified!
- Posts: 1882
- Joined: Tue Jun 14, 2011 8:48 pm
- Location: Ridgecrest, CA
Re: Wireing
Is this the harness on the instrument cluster itself, or the one the instrument harness plugs into? Just double-checking.
Joseph
Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
-
- New Member
- Posts: 56
- Joined: Sun Sep 09, 2012 5:30 pm
- Location: South Texas
Re: Wireing
It the wiring harness that the instrument cluster connects on to, it's the one thats got the fuse box and runs all the way to the other side and connects to the heater, underneath the dash board.
- mk
- Blue Oval Fanatic
- Posts: 917
- Joined: Wed Mar 02, 2005 1:12 am
- Location: CANADA, central Alberta
Re: Wireing
To get the right replacement other than aftermarket, you need to tell us if it has 2 or 4 gauges. There is also a difference between early (pre dec 66) and late production 67 harnesses. The late production 67 dash harness is the same format as the 68/69 dash harnesses so these are a direct plug in replacement (even for the early harness), but you have to have the matching cluster harness and ignition switch to go with them.
mike
mike
Always drink upstream from the herd...
~Will Rogers
Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
~Will Rogers
Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
-
- New Member
- Posts: 56
- Joined: Sun Sep 09, 2012 5:30 pm
- Location: South Texas
Re: Wireing
Mine has 4 gauges I think i ts the late 67 dash harness