Bumps At Work!
Moderator: FORDification
- KRob
- New Member
- Posts: 238
- Joined: Fri Jul 15, 2011 12:05 pm
- Location: Oregon, North Eastern Corner
Re: Bumps At Work!
I am not sure how much gravel it is, and i don’t believe we have any scales around here. My Dad was driving the Ford and i was driving the Dodge and i know there was a little weight because my slightly turned up Dodge was a little slower than normal.
Luckily we have another antique sitting around. Late 40s early 50s John Deere MC.
(as a kid i was reading a book about a battle either in the Pacific with the Marines or in Israel and they were using a Dozer named Natasha to push over buildings...and a kid with a spray can is a dangerous thing....anyway it stuck and has been repainted a couple times )
But there is no rest for the wicked....after finishing up spreading gravel it was off for wood.
I would have loaded up more but my brother who was with me basically told me he was going to mutiny if we continued.
Luckily we have another antique sitting around. Late 40s early 50s John Deere MC.
(as a kid i was reading a book about a battle either in the Pacific with the Marines or in Israel and they were using a Dozer named Natasha to push over buildings...and a kid with a spray can is a dangerous thing....anyway it stuck and has been repainted a couple times )
But there is no rest for the wicked....after finishing up spreading gravel it was off for wood.
I would have loaded up more but my brother who was with me basically told me he was going to mutiny if we continued.
Last edited by KRob on Tue Nov 25, 2014 12:21 am, edited 1 time in total.
71 F250 4x4, 4BT Cummins Mostly Done...Project Thread http://www.fordification.com/forum/view ... 22&t=65450
(4BT, big block ZF5, 78 NP205, 78 Dana 44 Front axle, 4.10, 265/75/16, power steering, power brakes)
01 Dodge 2500 4x4 Cummins...turned up a little.
(4BT, big block ZF5, 78 NP205, 78 Dana 44 Front axle, 4.10, 265/75/16, power steering, power brakes)
01 Dodge 2500 4x4 Cummins...turned up a little.
- 1972hiboy
- 100% FORDified!
- Posts: 2421
- Joined: Thu Sep 09, 2010 5:44 pm
- Location: California, Santa Cruz
Re: Bumps At Work!
Oh MC's are so cool. I have my gradfathers 48' model M its a blast. Is that a husky or dolmar saw I see poking out in front of the pile?
Rich
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
- KRob
- New Member
- Posts: 238
- Joined: Fri Jul 15, 2011 12:05 pm
- Location: Oregon, North Eastern Corner
Re: Bumps At Work!
The MC...or "Johnny Popper" is a great little machine...when she wants to run. She has turned into a finiky young lady, part of the problem is we dont use her all that much so she does a lot of sitting and breaking.
Husky....its not a big one but its not a small one either. Biggest none commercial i think. It will really throw the chips.
Ended up hauling three more loads of wood over the last few days in between other things.
Rob
Husky....its not a big one but its not a small one either. Biggest none commercial i think. It will really throw the chips.
Ended up hauling three more loads of wood over the last few days in between other things.
Rob
71 F250 4x4, 4BT Cummins Mostly Done...Project Thread http://www.fordification.com/forum/view ... 22&t=65450
(4BT, big block ZF5, 78 NP205, 78 Dana 44 Front axle, 4.10, 265/75/16, power steering, power brakes)
01 Dodge 2500 4x4 Cummins...turned up a little.
(4BT, big block ZF5, 78 NP205, 78 Dana 44 Front axle, 4.10, 265/75/16, power steering, power brakes)
01 Dodge 2500 4x4 Cummins...turned up a little.
- 1972hiboy
- 100% FORDified!
- Posts: 2421
- Joined: Thu Sep 09, 2010 5:44 pm
- Location: California, Santa Cruz
Re: Bumps At Work!
havent seen this thread active for awhile.Went out to my dads place with the old log splitter to munch away at a oak pile. thought Id share the pic.
You do not have the required permissions to view the files attached to this post.
Rich
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
-
- Blue Oval Guru
- Posts: 1177
- Joined: Fri Jun 03, 2011 11:01 pm
- Location: Burney Ca.
Re: Bumps At Work!
I love your truck Rich, Once mine is ready for a trek up 17 we should snag a few pics of the highboys together
-Mike-
ECV 1849
Build>http://fordification.com/forum/viewtopi ... 22&t=68225
69' F250 Highboy 390ci.,NP435,Dana 24,HPD44,D60
67' Dodge Coronet R/T 440ci.4speed,D60, all numbers correct
72' Dodge Dart 440ci.727,D60,10ptcage street strip on meth 10.40s
05' Chevy Tahoe LT loaded for the wife an the baby duty
12' Ford Focus Titanium Hatch Back, Gas saver for the work week
ECV 1849
Build>http://fordification.com/forum/viewtopi ... 22&t=68225
69' F250 Highboy 390ci.,NP435,Dana 24,HPD44,D60
67' Dodge Coronet R/T 440ci.4speed,D60, all numbers correct
72' Dodge Dart 440ci.727,D60,10ptcage street strip on meth 10.40s
05' Chevy Tahoe LT loaded for the wife an the baby duty
12' Ford Focus Titanium Hatch Back, Gas saver for the work week
-
- Preferred User
- Posts: 269
- Joined: Fri Jul 10, 2009 12:02 pm
- Location: Dora Alabama
Re: Bumps At Work!
not impressive to look at but was definately heavy. I say about 5k on the trailer pkus the trailer weight and my dad said there is about 6k on the trailer. The old bump done quiet well.
I even had a little junk in the bed
I even had a little junk in the bed
1971 F-100 swb 401 fe , edelbrock intake, cam, valve covers, longtube headers with twin 2.5 inch exhaust, aluminum wheels.
1965 Mustang 350 glide 7.45 at 90mph
1972 maverick 460 swap in progress
2002 z28 a few bolt ons
1965 Mustang 350 glide 7.45 at 90mph
1972 maverick 460 swap in progress
2002 z28 a few bolt ons
- 1972hiboy
- 100% FORDified!
- Posts: 2421
- Joined: Thu Sep 09, 2010 5:44 pm
- Location: California, Santa Cruz
Re: Bumps At Work!
CrypticRacer13 wrote:I love your truck Rich, Once mine is ready for a trek up 17 we should snag a few pics of the highboys together
Hey Mike, Thanks! Although I must admit the pic makes the truck look alot better than it really is. Im totally down for a lil meet up,
Rich
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
- austin
- Blue Oval Fan
- Posts: 572
- Joined: Mon May 04, 2009 11:30 pm
- Location: Utah, Moroni
Re: Bumps At Work!
i dont think i ever shared these this by far the heavest thing i have towed with the bump
this is after i was done building it we towed it to arena with my brothers powerstroke though
this is after i was done building it we towed it to arena with my brothers powerstroke though
-
- Blue Oval Guru
- Posts: 1177
- Joined: Fri Jun 03, 2011 11:01 pm
- Location: Burney Ca.
Re: Bumps At Work!
Enduro?
-Mike-
ECV 1849
Build>http://fordification.com/forum/viewtopi ... 22&t=68225
69' F250 Highboy 390ci.,NP435,Dana 24,HPD44,D60
67' Dodge Coronet R/T 440ci.4speed,D60, all numbers correct
72' Dodge Dart 440ci.727,D60,10ptcage street strip on meth 10.40s
05' Chevy Tahoe LT loaded for the wife an the baby duty
12' Ford Focus Titanium Hatch Back, Gas saver for the work week
ECV 1849
Build>http://fordification.com/forum/viewtopi ... 22&t=68225
69' F250 Highboy 390ci.,NP435,Dana 24,HPD44,D60
67' Dodge Coronet R/T 440ci.4speed,D60, all numbers correct
72' Dodge Dart 440ci.727,D60,10ptcage street strip on meth 10.40s
05' Chevy Tahoe LT loaded for the wife an the baby duty
12' Ford Focus Titanium Hatch Back, Gas saver for the work week
- austin
- Blue Oval Fan
- Posts: 572
- Joined: Mon May 04, 2009 11:30 pm
- Location: Utah, Moroni
Re: Bumps At Work!
no something much more disgusting...... demolition derby
-
- Blue Oval Guru
- Posts: 1177
- Joined: Fri Jun 03, 2011 11:01 pm
- Location: Burney Ca.
Re: Bumps At Work!
Nice my dad use to do enduro when i was a kid. good timesaustin wrote:no something much more disgusting...... demolition derby
-Mike-
ECV 1849
Build>http://fordification.com/forum/viewtopi ... 22&t=68225
69' F250 Highboy 390ci.,NP435,Dana 24,HPD44,D60
67' Dodge Coronet R/T 440ci.4speed,D60, all numbers correct
72' Dodge Dart 440ci.727,D60,10ptcage street strip on meth 10.40s
05' Chevy Tahoe LT loaded for the wife an the baby duty
12' Ford Focus Titanium Hatch Back, Gas saver for the work week
ECV 1849
Build>http://fordification.com/forum/viewtopi ... 22&t=68225
69' F250 Highboy 390ci.,NP435,Dana 24,HPD44,D60
67' Dodge Coronet R/T 440ci.4speed,D60, all numbers correct
72' Dodge Dart 440ci.727,D60,10ptcage street strip on meth 10.40s
05' Chevy Tahoe LT loaded for the wife an the baby duty
12' Ford Focus Titanium Hatch Back, Gas saver for the work week
-
- New Member
- Posts: 16
- Joined: Sat Jun 23, 2012 12:01 am
- Location: Columbia, MO
Re: Bumps At Work!
Moving day 1994. The trailer got brand new shocks and overload springs after this move. It was a lot more stable when I moved again the following year. Last week I started disassembling the old truck. Going to do a complete rebuild which includes filling the gap in the middle with a truck box made out of another rusty old short bed that I've got stashed out back.
You do not have the required permissions to view the files attached to this post.
- 1972hiboy
- 100% FORDified!
- Posts: 2421
- Joined: Thu Sep 09, 2010 5:44 pm
- Location: California, Santa Cruz
Re: Bumps At Work!
Multiford wrote:Moving day 1994. The trailer got brand new shocks and overload springs after this move. It was a lot more stable when I moved again the following year. Last week I started disassembling the old truck. Going to do a complete rebuild which includes filling the gap in the middle with a truck box made out of another rusty old short bed that I've got stashed out back.
Holy cow thats a land train! WHat frame is that truck sitting on a crew cabs? thats cool,
Rich
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
-
- New Member
- Posts: 156
- Joined: Sat Sep 26, 2009 6:06 pm
- Location: West Virginia
Re: Bumps At Work!
Here is a couple of moving pulp wood. There is about 2 more loads haha. Thought I would add one of moving Hay too.
You do not have the required permissions to view the files attached to this post.
1994 F150
1968 Bronco
1968 F350
1958 F100 Great Grandfathers Last Truck
1954 F100 Dad's First Truck
1968 Bronco
1968 F350
1958 F100 Great Grandfathers Last Truck
1954 F100 Dad's First Truck
- 1970 Hi-Boy
- Preferred User
- Posts: 344
- Joined: Thu Mar 08, 2012 2:22 pm
- Location: Middle Tenessee/Northern Wisconsin/wherever else I may roam to try and make a buck.
Re: Bumps At Work!
A little firewood for those colder of days. The only fuel that warms you twice!
1970 F250 Sport Custom 4x4 360 V8, otherwise known as the Hi Boy, and a Harley-Davidson.
1953 Lincoln SA200 portable welder with a 4 cylinder 1941 Continental F162 engine.
"If you think you can do a thing or think you can't do a thing, you're right." Henry Ford
1953 Lincoln SA200 portable welder with a 4 cylinder 1941 Continental F162 engine.
"If you think you can do a thing or think you can't do a thing, you're right." Henry Ford