All,
Just joined Fordification and this site looks absolutely great!!! I have a nice 1967 F100 and could use some help. I recently had a starting problem and during troubleshooting I was checking fuses. During this, I broke the glass fuse for the instrument panel and/or radio. Based on my fuse panel (bit confusing), I can't determine what my fuse amperage is for the Instrument panel fuse and radio. I thought it was a 14 Amp but that is too big. The fuse I am trying to replace is a short fuse.
Can anybody help me out here? Appreciate any help you could provide. Thanks
bob e 1 in San Antonio, TX. Looking forward to using this site and chatting with y'all.
Need help with fuses amps identification
Moderators: FORDification, Thunderfoot
-
bob e 1
- New Member
- Posts: 3
- Joined: Tue Apr 10, 2012 9:24 pm
-
SmoothJ69
- New Member
- Posts: 100
- Joined: Mon Mar 12, 2012 3:46 pm
Re: Need help with fuses amps identification
the instrument panel is a 2amp fuse. the stock radio (I think) is powered off the dome\cigar lighter fuse which is 15amp.
oh and
oh and
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Need help with fuses amps identification
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
SmoothJ69
- New Member
- Posts: 100
- Joined: Mon Mar 12, 2012 3:46 pm
Re: Need help with fuses amps identification
I'd think this would be closer
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Need help with fuses amps identification
That's what my '70 F100 looks like.Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
davbell22602
- Blue Oval Fan
- Posts: 677
- Joined: Thu Aug 12, 2010 6:55 pm
- Location: Bunker Hill, West Virginia
Re: Need help with fuses amps identification
I wish there was one for 67F100 fuse panel?
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Need help with fuses amps identification
Oops...sorry bout that guys. Posting before the first cup of coffee should be illegal! 
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
bob e 1
- New Member
- Posts: 3
- Joined: Tue Apr 10, 2012 9:24 pm
Re: Need help with fuses amps identification
Thanks for the replies on the fuse problem, very much appreciated.
I am now searching for a 2 amp fuse for the instrument panel slot. I have found the 2 amp but it is a longer fuse than the one that I have in my truck...uses a shorter fuse and didn't have any luck finding one today at Pep Boys, Auto Zone, or another place. Any further ideas on where to look for the short 2 or 4 amp fuse that will fit in the slot that I have in my fuse panel. Thanks again guys. I love this site!!!!
bob e 1
I am now searching for a 2 amp fuse for the instrument panel slot. I have found the 2 amp but it is a longer fuse than the one that I have in my truck...uses a shorter fuse and didn't have any luck finding one today at Pep Boys, Auto Zone, or another place. Any further ideas on where to look for the short 2 or 4 amp fuse that will fit in the slot that I have in my fuse panel. Thanks again guys. I love this site!!!!
bob e 1
-
SmoothJ69
- New Member
- Posts: 100
- Joined: Mon Mar 12, 2012 3:46 pm
Re: Need help with fuses amps identification
radioshack maybe, my local oreilly's has em in a 5 pack for about 4 bucks..littelfuse part number AGA2BP
I'm surprised pepboys wasn't able to find em, they are pretty standard items.
I'm surprised pepboys wasn't able to find em, they are pretty standard items.