where is a good source for a wiring harness for my 70?
-
nelson3
- New Member
- Posts: 13
- Joined: Tue Nov 30, 2004 11:25 pm
- Location: Alabama
-
heep70
- 100% FORDified!
- Posts: 2039
- Joined: Mon Sep 13, 2004 11:03 pm
- Location: Washington, Bonney Lake
- Contact:
re: where is a good source for a wiring harness for my 70?
to the forum nelson3How about Painless Wiring? Not sure, but it might be a place to check.
Greg
1971 F250 "Highboy". SOLD to "Highboy_Firefighter_71"
2000 Subaru Outback limited.
2000 F250 4X4 PSD SuperDuty Crew.
2010 Polaris 800RMK Dragon 155"
2013 Polaris Pro 800 RMK 163"
1980 Built Toyota "Trail Rig".
My last 1971 "Highboy" pics
1971 F250 "Highboy". SOLD to "Highboy_Firefighter_71"
2000 Subaru Outback limited.
2000 F250 4X4 PSD SuperDuty Crew.
2010 Polaris 800RMK Dragon 155"
2013 Polaris Pro 800 RMK 163"
1980 Built Toyota "Trail Rig".
My last 1971 "Highboy" pics
-
FoMoCo
- Preferred User
- Posts: 409
- Joined: Wed Nov 10, 2004 1:18 am
- Location: Ohio, Cincinnati
re: where is a good source for a wiring harness for my 70?
Im bringing home a cherry 1970 w/351w this weekend i'll let you know if the harness is worth getting.
Nick
Nick
1969 F-100
2006 Fusion SEL
2006 e-320 cdi
2004 excursion V-10
2006 Fusion SEL
2006 e-320 cdi
2004 excursion V-10
-
bluef250
- Blue Oval Fanatic
- Posts: 924
- Joined: Fri Oct 29, 2004 8:49 pm
- Location: Arizona
re: where is a good source for a wiring harness for my 70?
I acquired a '70 cab only. 
It still has harness. Do not know the condition of harness 
, but when I cleaned up the cab did not see any obvious problems. Ignition switch has been replaced, I destroyed wiper switch. Anyway it's available, don't really know what its worth. 
but its not doing me any good. If you didn't want to buy stock one, try getting a wiring diagram, lots of wire, some of the newer connectors with solder, and go to work.
It still has harness. Do not know the condition of harness , but when I cleaned up the cab did not see any obvious problems. Ignition switch has been replaced, I destroyed wiper switch. Anyway it's available, don't really know what its worth. but its not doing me any good. If you didn't want to buy stock one, try getting a wiring diagram, lots of wire, some of the newer connectors with solder, and go to work.